Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Ridgewood?
Duct repair and sealing in Ridgewood typically costs $350 to $1,200 for a typical single-family house, with most residential jobs landing between $450 and $850. Small fixes like sealing a handful of accessible joints often run $250 to $400, while a full-house sealing with duct replacement on damaged runs can reach $1,500 to $2,800. The written estimate you get after we look at the system sets the final price.
We’re Ridgewood Air Duct Cleaning, and duct repair and sealing is one of the five services we handle in-house, alongside air duct cleaning, dryer vent cleaning, HVAC cleaning, and air quality sanitizing. That matters for pricing: when we find leaks during a cleaning, we can seal them in the same visit instead of sending you to a second contractor who has to open the system up all over again.
Call (866) 443-1814 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical Ridgewood duct sealing: $350-$1,200; most jobs fall in the $450-$850 band.
- Leaky ducts in a forced-air home can waste a meaningful share of the air your system pays to condition, so sealing often pays back through lower heating and cooling bills.
- Two-story frame houses with ducts in unconditioned attic or crawl space run higher than ranches with short, straight runs.
- Professional-grade equipment matters: we use Rotobrush rotary brush systems, Nikro negative-air machines, and Abatement Technologies filtration, the same class of tools used in commercial and remediation work.
- Free estimates, and the price is set per job by the written estimate before any work starts.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s what the line items look like for Ridgewood homes headed into 2026. These are typical ranges, not exact quotes. Every system is different, and the estimate we write after inspecting yours is what you’ll actually pay.
| Work Item | Typical Range | What It Covers |
|---|---|---|
| Sealing accessible leaks and joints | $250 – $400 | Mastic or foil-tape sealing of joints, seams, and boots reached from the basement or attic |
| Full-house duct sealing | $450 – $850 | Sealing the full supply and return pathway, including register boots and plenum connections |
| Replacing a damaged flex duct run | $150 – $350 per run | Removing crushed, torn, or disconnected flex duct and installing new insulated flex |
| Repairing rigid sheet-metal duct | $200 – $600 per section | Patching holes, reconnecting separated sections, rebuilding a crushed trunk |
| Duct cleaning before sealing | $300 – $700 | Full-system cleaning so the seal goes onto clean surfaces and stays put |
| Register and boot replacement | $60 – $180 per register | New boot, damper, or grille where the old one is bent, rusted, or oversized for the opening |
| Full-house sealing with duct replacement | $1,500 – $2,800 | Multiple damaged runs replaced plus whole-system sealing on an older or heavily neglected system |
What pushes a job toward the top of the range? Access first. Ducts buried under blown insulation in an attic, or wedged above a finished basement ceiling, take longer to reach and longer to seal properly. Second, condition of the ductwork itself: crushed flex runs and separated sheet-metal sections need replacement, not just a bead of sealant. Third, system size: a large two-story with a long trunk line and a dozen registers costs more than a compact ranch with six. And if you’re pairing repair with duct cleaning, doing both in one visit usually keeps the combined cost below what two separate appointments would run.
One thing we’ll say plainly: if a contractor quotes you a flat number over the phone before looking at your system, that number is a guess. We inspect the air handler, the plenum, the trunk, and the branch runs before we write anything down.
What Affects Duct Repair & Sealing Pricing in Ridgewood
Ridgewood has a housing stock that shapes duct work in specific ways. A lot of the neighborhood is pre-war two- and three-story frame and brick homes, many of them converted or expanded over the years, with forced-air systems retrofitted into spaces that weren’t designed for them. Here’s what that means at estimate time.
- Retrofitted ductwork in older homes. When ductwork was squeezed into a house built before forced air was common, runs tend to be short, boxed in, and routed through tight chases. Reaching a leak in a boxed chase takes more time than reaching one in an open basement, and that labor is the biggest single driver of the final price.
- Ducts in unconditioned attic space. In Ridgewood’s humid summers, attic ducts sweat, and insulation on old flex duct breaks down. We often find duct runs in attics that show condensation damage and torn outer jackets, which means replacement rather than a simple seal.
- Heating-season pressure. Ridgewood homes run their furnaces hard from late fall through early spring. A system with leaking ducts loses conditioned air into the walls and attic during exactly the months when you’re paying the most to heat it. That’s the practical case for sealing.
- Type of duct material. Flex duct is cheap to replace but easy to crush. Rigid sheet metal lasts longer but costs more to repair when a section separates. If your system is a mix, the estimate breaks out each part separately.
- Number of accessible register boots. Every register boot is a potential leak point. Homes with ten or twelve registers carry more sealing work than homes with six, and boot gaskets are often the first thing to fail.
- Whether cleaning is needed first. Sealing over a dirty duct doesn’t hold. If the system hasn’t been cleaned, we recommend cleaning first so the sealant bonds to clean metal or flex, not dust and debris.
We treat duct repair & sealing as a native part of the same job as cleaning, not a separate referral. If the inspection turns up leaks, we fix them in the same visit and show you what we found before we start.
How to Save on Duct Repair & Sealing in Ridgewood
There’s no magic coupon here. What saves money on this work is getting the scope right the first time and not paying twice for the same access. A few practical moves:
- Get the estimate in writing before anything starts. A written estimate that names the specific leaks, runs, and registers being addressed protects you from scope creep. Ours is free, and it’s itemized. Call (866) 443-1814 to set one up.
- Combine cleaning and sealing in one visit. If your ducts need cleaning and sealing, having both done in the same appointment saves the second trip and the second setup. The two jobs share the same access points.
- Fix small leaks before they spread. A single separated joint in a basement is cheap to seal. The same leak left for a few seasons can soak insulation, rust sheet metal, and grow into a bigger repair.
- Ask about the register boots. Boot gaskets and register seals are often the cheapest fixes with the biggest effect on how much air actually reaches the room.
- Skip the cosmetic work until the mechanical work is done. If a contractor suggests new grilles before addressing the leaks behind them, ask why. Sealing and cleaning come first.
One honest note: the biggest cost saver is a thorough inspection. Our technicians have up to 10 years of experience, and a proper inspection catches the problems that would otherwise turn into a much larger bill later. That’s why we don’t quote over the phone.
Why Professional-Grade Equipment Changes the Price
Duct sealing done with consumer tools tends to fail. A shop vacuum and a tube of caulk won’t reach the leaks that matter, and they won’t hold up to the pressure a forced-air system puts on a joint. We run Rotobrush rotary brush systems and Nikro negative-air machines, the same class of equipment used in commercial and restoration work, along with Abatement Technologies air filtration for containment. That’s not a sales point; it’s the difference between a seal that holds and one that peels off in a season.
When the work involves filtration or humidity control, we also service Honeywell and Aprilaire product lines. Those are brands with decades of HVAC credibility, and pairing a properly sealed system with the right filtration is what actually improves the air you’re breathing.
How Much Does Duct Repair Cost Without Sealing?
Duct repair alone, without whole-house sealing, typically runs $150 to $600 depending on whether it’s a flex run replacement or a sheet-metal repair. Sealing is usually paired with repair because a repaired section still has joints and seams that leak. Repairing without sealing is like patching a wall and leaving the window open.
Most customers who call about a single repair end up getting sealing included once we show them the leaks in the rest of the system. The combined price is usually lower than they expect because the access work is shared.
Can Duct Repair & Sealing Be Done the Same Day?
Yes, in many cases. A single-run flex replacement or a round of accessible joint sealing is often finished in one visit. Full-house sealing with multiple replacements usually takes a longer single appointment or a scheduled return, and we’ll tell you which at estimate time. For same-day scheduling, call (866) 443-1814. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Duct Repair & Sealing Cost
How much does duct sealing cost in Ridgewood?
Duct sealing in Ridgewood typically costs $250 to $850 for residential work, with full-house sealing on a standard forced-air system landing around $450 to $850. Larger homes or systems with damaged runs can run higher. Call (866) 443-1814 for a free estimate; the written estimate sets the final price.
Is it cheaper to repair or replace ductwork?
Repair is almost always cheaper than replacement: a single flex run runs $150 to $350 to replace versus $1,500 to $2,800 for full-system replacement. Replace the section, not the system, when the damage is isolated. Call (866) 443-1814 and we’ll tell you which makes sense after inspecting your ducts.
How much does duct cleaning and sealing cost together in Ridgewood?
Combined cleaning and sealing typically runs $650 to $1,400 for a typical Ridgewood home. Doing both in one visit saves the second trip and setup charge. Call (866) 443-1814 for a combined free estimate.
Does duct sealing really lower energy bills?
It can. Leaky ducts lose conditioned air into walls, attics, and crawl spaces, so your furnace or AC works harder to hit the thermostat setting. Sealing the leaks reduces that loss. The exact savings depend on your home and how leaky the system was, which is why we inspect first. Call (866) 443-1814 to schedule a free estimate.
Can duct leaks cause high dust or allergy symptoms?
Yes, they can. Leaky return ducts in particular can pull dust, insulation fibers, and attic or crawl-space air into the system and distribute it through the house. Sealing is usually the first step, followed by cleaning and air quality sanitizing where needed. Call (866) 443-1814 for a free assessment.
When to Call for Duct Repair & Sealing in Ridgewood
Signs that ducts need attention: rooms that never feel as warm or cool as the rest of the house, visible dust streaks around registers, musty smells when the system runs, or a utility bill that’s climbed without explanation. If a duct run is visibly crushed or disconnected, call sooner rather than later; a separated joint can pull attic or crawl-space air into the living space for years before anyone notices.
For a free estimate on duct repair and sealing in Ridgewood, call (866) 443-1814. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Estimates are free, pricing is upfront, and the written estimate is what you pay.
Written by the team at Ridgewood Air Duct Cleaning.
Pricing reflects the Ridgewood market as of 2026. Ridgewood Air Duct Cleaning offers free estimates – call (866) 443-1814.
What Our Customers Say
"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Elena Hernandez"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Justin Lin"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Imani Boyd